BluePrint Engines logo

BluePrint Motorsports 426 C.I.D. 610 HP Mopar Hemi Long Block

BluePrint Motorsports · Mopar Hemi · 7.0L/426 · Mopar Hemi Crate Engines | SKU# MLL-PS426CT New

BluePrint Motorsports 426 C.I.D. 610 HP Mopar Hemi Long Block IDMLL-PS426CT 1 / 3

Buy with confidence

Listed by part number · full manufacturer specification · freight to all 50 states

Specified in full

Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.

What is included

Core returns & warranty

Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.

How it works

Freight nationwide

Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.

Shipping rates

Payment options

Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.

How to pay
Included with every engine: Pre-shipment inspectionTitle & customs paperworkDelivery quoteImport compliance
Questions? (470) 201-3931

Details

Displacement 7.0L/426
Horsepower 610 hp
Assembly Long Block
Induction Fuel Injected
Compression 10.48:1
Block Cast iron
Condition New
Part # MLL-PS426CT

General

Catalogue ID ENG51855
Summit part # MLL-PS426CT
Manufacturer part # PS426CT
UPC 00887753915955
Brand BluePrint Motorsports
Product line BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines
Category Mopar Hemi Crate Engines
Part type Crate Engines
Engine family Mopar Hemi
Fits Dodge
Availability Backorder
Est. ship date Dec 17, 2026

Manufacturer specifications

29 fields as published by BluePrint Motorsports.

Crate Engine Family Mopar Hemi Gen III
Actual Engine Displacement 7.0L/426
Crate Engine Cylinder Head Material Aluminum
Engine Block Material Cast iron
Advertised Compression Ratio 10.48:1
Assembled Yes
Engine Balance Internal
Cam Style Hydraulic roller, OE roller
Rear Main Seal Style 1-piece
Intake Manifold Included No
Cylinder Heads Included Yes
Carburetor Included No
Throttle Body Included No
Distributor Included No
Oil Pan Included Yes
Valve Covers Included Yes
Timing Cover Included Yes
Water Pump Included Yes
Harmonic Balancer Included Yes
Flexplate Included No
Flywheel Included No
Air Cleaner Included No
Spark Plugs Included No
Spark Plug Wires Included No
Computer Included No
Wiring Harness Included No
Stall Speed Rating RPM Range 2,500-3,500
Supercharger Included No
Remanufactured No

Spread the cost

Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.

Estimated from $298/mo
Call (470) 201-3931

Subject to lender approval. We are not the lender and make no credit decision.

About this engine

Overview

This BluePrint Motorsports long block is a brand-new 7L (426 c.i.d.) Mopar Hemi assembly rated at 610 horsepower, with a 10.48:1 compression ratio. It is built with cast iron block, aluminum cylinder heads and a hydraulic roller, oe roller camshaft. Induction is fuel injected.

Manufacturer description

BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

What is included

This long block arrives with the following fitted:

  • Cylinder Heads
  • Harmonic Balancer
  • Oil Pan
  • Timing Cover
  • Valve Covers
  • Water Pump

About the Mopar Gen III Hemi platform

The Gen III Hemi revived the name in 2003 with a hemispherical-chamber V8 that makes strong power out of the box and takes a supercharger without complaint. The 5.7L, 6.4L 392 and supercharged 426 are the backbone of modern Mopar performance.

  • Excellent cylinder-head flow straight from the factory
  • Takes positive-displacement boost extremely well on forged internals
  • Supercharged 426 combinations reach 870-plus horsepower as a crate package
  • Drops into Challenger, Charger, Ram and an expanding list of swap chassis

Key specifications

  • Part number: MLL-PS426CT
  • Manufacturer part number: PS426CT
  • Brand: BluePrint Motorsports
  • Part type: Crate Engines
  • Assembly: Long Block
  • Condition: New
  • Engine family: Mopar Hemi
  • Displacement: 7L (426 c.i.d.)
  • Horsepower: 610 hp
  • Compression ratio: 10.48:1
  • Block material: Cast iron
  • Cylinder head material: Aluminum
  • Camshaft style: Hydraulic roller, OE roller
  • Engine balance: Internal
  • Rear main seal: 1-piece
  • Induction: Fuel Injected
  • Aspiration: Naturally Aspirated
  • UPC: 00887753915955

Ideal for

Builders choose a BluePrint Motorsports long block like this one for Challenger and Charger builds, Hemi swaps, supercharged street cars, Ram engine repowers and muscle car restomods. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.

Ordering & shipping

Priced at $14,299, this BluePrint Motorsports long block is listed under part number MLL-PS426CT (UPC 00887753915955). Current estimated availability is Dec 17, 2026. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.

California Proposition 65

This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

Cylinder HeadsHarmonic BalancerOil PanTiming CoverValve CoversWater Pump

You may also like

View all ›
Call