Chevrolet Performance 632 C.I.D. Marine Long Block
Chevrolet Performance · Marine · 10.3L/632 · Marine Engines | SKU# NAL-19432060 New
IDNAL-19432060 1 / 3 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG82715 |
|---|---|
| Summit part # | NAL-19432060 |
| Manufacturer part # | 19432060 |
| Brand | Chevrolet Performance |
| Product line | Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines |
| Category | Marine Engines |
| Part type | Crate Engines |
| Engine family | Marine |
| Fits | Chevrolet |
| Availability | Backorder |
| Est. ship date | Tomorrow |
Manufacturer specifications
32 fields as published by Chevrolet Performance.
| Crate Engine Family | Chevy Big Block |
|---|---|
| Actual Engine Displacement | 10.3L/632 |
| Crate Engine Cylinder Head Material | Aluminum |
| Engine Block Material | Cast iron |
| Advertised Compression Ratio | 12.0:1 |
| Assembled | Yes |
| Engine Balance | Internal |
| Cam Style | Hydraulic roller, OE roller |
| Rear Main Seal Style | 1-piece |
| Intake Manifold Included | Yes |
| Intake Manifold Style | Fuel Injection |
| Cylinder Heads Included | Yes |
| Carburetor Included | No |
| Throttle Body Included | Yes |
| Distributor Included | No |
| Oil Pan Included | Yes |
| Valve Covers Included | Yes |
| Timing Cover Included | Yes |
| Water Pump Included | Yes |
| Harmonic Balancer Included | Yes |
| Flexplate Included | No |
| Flywheel Included | No |
| Air Cleaner Included | No |
| Spark Plugs Included | Yes |
| Spark Plug Wires Included | Yes |
| Computer Included | Yes |
| Wiring Harness Included | Yes |
| Water Pump Style | Short |
| Supercharger Included | No |
| Remanufactured | No |
| Notes | Will require an internal balance flywheel or flexplate. |
| Special Attention | Features a 4500 Dominator style flange throttle body that will need to be installed. Requires an EFI compatible high pressure fuel pump, starter, and air cleaner with 4500 style flange. Custom exhaust system required due to cylinder head port design. Not intended for marine use. |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This Chevrolet Performance long block is a brand-new 10.3L (632 c.i.d.) Marine assembly, with a 12.0:1 compression ratio. It is built with cast iron block, aluminum cylinder heads and a hydraulic roller, oe roller camshaft. Induction is fuel injected.
Manufacturer description
Chevrolet Performance ZZ632/1000 Deluxe Long Block Crate Engines Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher Will require an internal balance flywheel or flexplate. Features a 4500 Dominator style flange throttle body that will need to be installed. Requires an EFI compatible high pressure fuel pump, starter, and air cleaner with 4500 style flange. Custom exhaust system required due to cylinder head port design. Not intended for marine use.
What is included
This long block arrives with the following fitted:
- Computer
- Cylinder Heads
- Harmonic Balancer
- Intake Manifold
- Oil Pan
- Spark Plug Wires
- Spark Plugs
- Throttle Body
- Timing Cover
- Valve Covers
- Water Pump
- Wiring Harness
About the Marine platform
Marine engines face a duty cycle no street engine ever sees: wide-open throttle for hours at a time, in water that is often salt. They are built differently as a result — marine-specific camshafts, bearings, gaskets and brass freeze plugs.
- Marine cam profiles and valve springs suited to sustained high load
- Corrosion-resistant internals and brass freeze plugs
- Available in reverse rotation for the second engine in a twin installation
- Based on proven GM small and big block architecture, so parts are easy to find
Key specifications
- Part number: NAL-19432060
- Manufacturer part number: 19432060
- Brand: Chevrolet Performance
- Part type: Crate Engines
- Assembly: Long Block
- Condition: New
- Engine family: Marine
- Displacement: 10.3L (632 c.i.d.)
- Compression ratio: 12.0:1
- Block material: Cast iron
- Cylinder head material: Aluminum
- Camshaft style: Hydraulic roller, OE roller
- Engine balance: Internal
- Rear main seal: 1-piece
- Induction: Fuel Injected
- Aspiration: Naturally Aspirated
Ideal for
Builders choose a Chevrolet Performance long block like this one for sterndrive and inboard repowers, ski and wakeboard boats, cruisers and runabouts, twin-engine installations and charter and commercial boats. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.
Ordering & shipping
Priced at $34,703, this Chevrolet Performance long block is listed under part number NAL-19432060. Current estimated availability is Tomorrow. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Features
You may also like
View all ›
BluePrint Engines 454 C.I.D. 460 HP Marine Long Block
7.4L/454 · 460 hp
$9,699
Chevrolet Performance 454 C.I.D. Marine Dressed Long Block
7.4L/454
$17,740
Chevrolet Performance 572 C.I.D. 620 HP Marine Long Block
9.4L/572 · 620 hp
$24,320
Chevrolet Performance 376 C.I.D. Marine Long Block
6.2L/376
$13,490
Our price
$34,703.99
Chevrolet Performance 632 C.I.D. Marine Long Block
SKU# NAL-19432060 · est. $723/mo*




