Ford Performance Parts 213 C.I.D. 450 HP Ford Modular & Coyote Long Block
Ford Performance Parts · Ford Modular/Coyote · 3.5L/213 · Ford Modular & Coyote Crate Engines | SKU# FMS-M-6007-35TA New
IDFMS-M-6007-35TA Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG96302 |
|---|---|
| Summit part # | FMS-M-6007-35TA |
| Manufacturer part # | M-6007-35TA |
| UPC | 756122023334 |
| Brand | Ford Performance Parts |
| Product line | Ford Performance Parts 2024 Raptor 3.5L 450 HP EcoBoost Crate Engines |
| Category | Ford Modular & Coyote Crate Engines |
| Part type | Crate Engines |
| Engine family | Ford Modular/Coyote |
| Fits | Ford |
| Availability | Backorder |
| Est. ship date | Nov 17, 2026 |
Manufacturer specifications
29 fields as published by Ford Performance Parts.
| Crate Engine Family | Ford EcoBoost |
|---|---|
| Actual Engine Displacement | 3.5L/213 |
| Crate Engine Cylinder Head Material | Aluminum |
| Engine Block Material | Aluminum |
| Advertised Compression Ratio | 10.0:1 |
| Assembled | Yes |
| Engine Balance | Internal |
| Cam Style | DOHC |
| Rear Main Seal Style | 1-piece |
| Intake Manifold Included | Yes |
| Intake Manifold Style | Fuel Injection |
| Cylinder Heads Included | Yes |
| Carburetor Included | No |
| Throttle Body Included | Yes |
| Distributor Included | No |
| Oil Pan Included | Yes |
| Valve Covers Included | Yes |
| Timing Cover Included | Yes |
| Water Pump Included | Yes |
| Harmonic Balancer Included | Yes |
| Flexplate Included | Yes |
| Flywheel Included | No |
| Air Cleaner Included | No |
| Spark Plugs Included | Yes |
| Spark Plug Wires Included | No |
| Computer Included | No |
| Wiring Harness Included | Yes |
| Supercharger Included | No |
| Remanufactured | No |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This Ford Performance Parts long block is a brand-new 3.5L (213 c.i.d.) Ford Modular / Coyote assembly rated at 450 horsepower, with a 10.0:1 compression ratio. It is built with aluminum block, aluminum cylinder heads and a dohc camshaft. Induction is fuel injected.
Manufacturer description
Ford Performance Parts 2024 Raptor 3.5L 450 HP EcoBoost Crate Engines The Ford Performance 2024 Raptor 3.5L 450HP EcoBoost crate engines provide the benefit of a high-performance, factory-tested engine for your project or engine swap. They are the same twin-turbocharged, high-output engine found in the production 2024 Ford F-150 Raptor. The engine is built to the same specifications as the production Raptor, which was designed to endure the demanding conditions of high-performance off-roading. The crate engine includes a new block and all new internal components, removing the uncertainty associated with building an engine from used or aftermarket parts. It's important to note that crate engines are not a direct replacement and require other parts for installation that may not be included in this kit. Premium Unleaded Fuel is recommended. Features and specifications: * 450HP at 5,520 RPM * 510 lbs.-ft. of torque at 3,250 RPM * All-aluminum construction * 10.0:1 compression ratio * Dual overhead camshafts with variable camshaft timing * High Pressure Direct Fuel Injection * Premium Unleaded Fuel recommended * Lightweight die-cast aluminum block with six-bolt press-fit main bearing caps with piston-cooling jets * Fully counterweighted forged steel crankshaft * High-strength forged powder metal connecting rods with floating pins * Lightweight aluminum high-strength pistons with low-friction skirt coating * Tuned composite upper and lower intake manifold * 6-quart die-cast aluminum deep sump oil pan * Engine weight is 417 lbs. (without accessory drive) Important Note: Required control pack for this crate engine is NOT available from Ford Performance and NOT included in this kit. Builder must source engine controls separately.
What is included
This long block arrives with the following fitted:
- Cylinder Heads
- Flexplate
- Harmonic Balancer
- Intake Manifold
- Oil Pan
- Spark Plugs
- Throttle Body
- Timing Cover
- Valve Covers
- Water Pump
- Wiring Harness
About the Ford Modular & Coyote platform
Ford's overhead-cam V8 family: the 4.6L and 5.4L Modular engines that ran from the mid-90s through the F-150 and Super Duty, and the 5.0L Coyote that brought four valves per cylinder and variable cam timing to the mainstream Mustang.
- Coyote makes 400-plus horsepower naturally aspirated from the factory
- Four-valve heads breathe far better than any pushrod head at high rpm
- Extremely strong bottom ends — Modular blocks tolerate large amounts of boost
- Factory Ford Performance control packs make a swap genuinely plug-and-play
Key specifications
- Part number: FMS-M-6007-35TA
- Manufacturer part number: M-6007-35TA
- Brand: Ford Performance Parts
- Part type: Crate Engines
- Assembly: Long Block
- Condition: New
- Engine family: Ford Modular/Coyote
- Displacement: 3.5L (213 c.i.d.)
- Horsepower: 450 hp
- Compression ratio: 10.0:1
- Block material: Aluminum
- Cylinder head material: Aluminum
- Camshaft style: DOHC
- Engine balance: Internal
- Rear main seal: 1-piece
- Induction: Fuel Injected
- Aspiration: Naturally Aspirated
- UPC: 756122023334
Ideal for
Builders choose a Ford Performance Parts long block like this one for Coyote swaps, late-model Mustang rebuilds, F-150 and Super Duty replacements, boosted overhead-cam builds and modern restomods. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.
Ordering & shipping
Priced at $9,533, this Ford Performance Parts long block is listed under part number FMS-M-6007-35TA (UPC 756122023334). Current estimated availability is Nov 17, 2026. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Features
You may also like
View all ›Our price
$9,533.99
Ford Performance Parts 213 C.I.D. 450 HP Ford Modular & Coyote Long Block
SKU# FMS-M-6007-35TA · est. $199/mo*




