
BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Dressed Long Block MLL-PS426SCT
BluePrint Engines · Mopar Hemi · 7.0L/426 · Mopar Hemi Crate Engines | SKU# MLL-PS426SCT New
IDMLL-PS426SCT 1 / 3 Buy with confidence
Listed by part number · full manufacturer specification · freight to all 50 states
Specified in full
Every listing carries the manufacturer’s complete specification grid and included-parts list, so you know exactly what ships.
What is includedCore returns & warranty
Remanufactured assemblies carry a core charge and a manufacturer warranty — we confirm both in writing before you order.
How it worksFreight nationwide
Engines ship palletised by freight carrier to all 50 states. We quote the exact freight cost to your address before you commit.
Shipping ratesPayment options
Card, wire or bank transfer, with third-party finance plans available subject to the lender’s approval.
How to payDetails
General
| Catalogue ID | ENG62963 |
|---|---|
| Summit part # | MLL-PS426SCT |
| Manufacturer part # | PS426SCT |
| UPC | 00887753915979 |
| Brand | BluePrint Engines |
| Product line | BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP Base Long Block Crate Engines |
| Category | Mopar Hemi Crate Engines |
| Part type | Crate Engines |
| Engine family | Mopar Hemi |
| Fits | Dodge |
| Availability | Backorder |
| Est. ship date | Dec 17, 2026 |
Manufacturer specifications
32 fields as published by BluePrint Engines.
| Crate Engine Family | Mopar Hemi Gen III |
|---|---|
| Actual Engine Displacement | 7.0L/426 |
| Crate Engine Cylinder Head Material | Aluminum |
| Engine Block Material | Cast iron |
| Advertised Compression Ratio | 10.48:1 |
| Assembled | Yes |
| Engine Balance | Internal |
| Cam Style | Hydraulic roller, OE roller |
| Rear Main Seal Style | 1-piece |
| Intake Manifold Included | Yes |
| Intake Manifold Style | Fuel Injection |
| Cylinder Heads Included | Yes |
| Carburetor Included | No |
| Throttle Body Included | Yes |
| Distributor Included | No |
| Oil Pan Included | Yes |
| Valve Covers Included | Yes |
| Timing Cover Included | Yes |
| Water Pump Included | Yes |
| Harmonic Balancer Included | Yes |
| Flexplate Included | No |
| Flywheel Included | No |
| Air Cleaner Included | No |
| Spark Plugs Included | Yes |
| Spark Plug Wires Included | Yes |
| Computer Included | Yes |
| Wiring Harness Included | Yes |
| Stall Speed Rating RPM Range | 2,500-3,500 |
| Supercharger Included | Yes |
| Supercharger Model | Whipple 3.0L Twin Screw |
| Remanufactured | No |
| Special Attention | Includes complete Holley Terminator engine harness, ECU, drive-by-wire pedal, harness, sensors, throttle body, intake, injectors, and fuel rails. |
Spread the cost
Finance plans are offered by independent lenders and are subject to their approval. Send a request and we pass it on.
Subject to lender approval. We are not the lender and make no credit decision.
About this engine
Overview
This BluePrint Engines dressed long block is a brand-new 7L (426 c.i.d.) Mopar Hemi assembly rated at 872 horsepower, with a 10.48:1 compression ratio. It is built with cast iron block, aluminum cylinder heads and a hydraulic roller, oe roller camshaft. Induction is fuel injected and the engine is supercharged.
Manufacturer description
BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP Base Long Block Crate Engines BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2 Includes complete Holley Terminator engine harness, ECU, drive-by-wire pedal, harness, sensors, throttle body, intake, injectors, and fuel rails.
What is included
This dressed long block arrives with the following fitted:
- Computer
- Cylinder Heads
- Harmonic Balancer
- Intake Manifold
- Oil Pan
- Spark Plug Wires
- Spark Plugs
- Supercharger
- Throttle Body
- Timing Cover
- Valve Covers
- Water Pump
- Wiring Harness
About the Mopar Gen III Hemi platform
The Gen III Hemi revived the name in 2003 with a hemispherical-chamber V8 that makes strong power out of the box and takes a supercharger without complaint. The 5.7L, 6.4L 392 and supercharged 426 are the backbone of modern Mopar performance.
- Excellent cylinder-head flow straight from the factory
- Takes positive-displacement boost extremely well on forged internals
- Supercharged 426 combinations reach 870-plus horsepower as a crate package
- Drops into Challenger, Charger, Ram and an expanding list of swap chassis
Key specifications
- Part number: MLL-PS426SCT
- Manufacturer part number: PS426SCT
- Brand: BluePrint Engines
- Part type: Crate Engines
- Assembly: Dressed Long Block
- Condition: New
- Engine family: Mopar Hemi
- Displacement: 7L (426 c.i.d.)
- Horsepower: 872 hp
- Compression ratio: 10.48:1
- Block material: Cast iron
- Cylinder head material: Aluminum
- Camshaft style: Hydraulic roller, OE roller
- Engine balance: Internal
- Rear main seal: 1-piece
- Induction: Fuel Injected
- Aspiration: Supercharged
- UPC: 00887753915979
Ideal for
Builders choose a BluePrint Engines dressed long block like this one for Challenger and Charger builds, Hemi swaps, supercharged street cars, Ram engine repowers and muscle car restomods. Arriving assembled means fewer parts to source, one warranty to deal with, and a far shorter path from crate to running engine.
Ordering & shipping
Priced at $25,099, this BluePrint Engines dressed long block is listed under part number MLL-PS426SCT (UPC 00887753915979). Current estimated availability is Dec 17, 2026. Engines ship freight on a pallet; call or send an inquiry to confirm availability, freight cost to your address, and core-return requirements before you order.
California Proposition 65
This product can expose you to chemicals including those known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
Features
You may also like
View all ›
Edelbrock 426 C.I.D. Mopar Hemi Long Block
7.0L/426
$24,366
BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Dressed Long Block MLL-PS426SCTKB
7.0L/426 · 872 hp
$27,799
Summit Racing 426 C.I.D. 610 HP Mopar Hemi Dressed Long Block CMB-08-0270
7.0L/426 · 610 hp
$20,043
BluePrint Motorsports 426 C.I.D. 610 HP Mopar Hemi Long Block
7.0L/426 · 610 hp
$14,299
Our price
$25,099
BluePrint Engines 426 C.I.D. 872 HP Mopar Hemi Dressed Long Block MLL-PS426SCT
SKU# MLL-PS426SCT · est. $523/mo*



